Hoses and Connectors
Hoses and connectors are essential for blowing injection equipment. We differ between conveyor and injection hoses. We provide them in different diameters. All thinkable conveying lines and switches can be built using our hose connectors, hose clamps, y-pieces and fibre switches.
Conveyor Hoses and Injection Hoses
The blow-in pro distinguishes between injection and conveyor hoses. Injection hoses are available in two classes of rigidity: Red injection hoses are slightly stiffer than blue ones. Both are more than capable for inserting stud cavities. Their flexural properties facilitate a high quality channel in the cavity and they can be moved over barriers thereby.
The more flexible the blue injection hose is, the easier it is to handle during cold temperatures. The smaller bending radius facilitates the insertion of elements with little insulation thicknesses. The chequered design on the inside of the hose loosens the insulation material up more. This increases the productivity of the insulation material.
Conveyor hoses are napless on the inside and relatively soft. They are generally used to bridge distances between the machine and injection hose. In some cases, they can also be used for injection blowing. The conveyor hose is also available with a stranded copper wire which can also be grounded against electrostatic charge.
High-strength conveyor hoses have a thick wall and a spiral shielding made from steel. The wear is considerably more moderate with abrasive materials in comparison to the conventional injection or conveyor hoses.
You can find loads more information in our product data sheet.
Our connectors provide solutions for all conceivable conveyor lines and hose switches in combination with a fibre switch. They are adjusted to our hoses, insulation blowing machines and attachment devices. They ensure a perfect-hold and flawless transport.
- Hose connectors
- Rotary hose connectors:
Download product data sheet (945.4 kB)
- Hose clamps as fixation for all connectors
- Reducer tube connectors for changing hose diameter
- Y-piecs for induction of amplifier air flow
- Y-tubes for hook-ups of two insulation blowing machines
- Glass fibre rods for stiffing of injection hoses
- Quick connectors for fast hose changes
Brochure hoses and connectors (2.0 MB)
Fibre Switches and Fibre Switch Cascades
Fibre switches enable serial work with multiple-prepared injection lines. Fast switches between injection blowing and aspiration mode with an insulation blowing machine or an amplifier/vacuum station with suction drum are effortless using a revolver or a pneumatic fibre switch.
You can work even more rationally with a pneumatic fibre switch. Big wide elements are no longer an obstacle. Serial filling of many similiar elements is also much more time saving.
A fibre switch can be pre-installed in your transport vehicles or X-Floc insulation blowing mobile. Switches are executed smoothly and comfortably using only a single hand movement.
Special set-ups can be installed – for example: Fast aspiration of blockages in the conveyor line.
Furthermore, multiple fibre switches can be combined. Such systems are advantageous for big projects or for stationary element filling.
Flexible and space-saving, the powder-coated steel frame and ball bearing-supported reel are ideal for winding up and unwinding your hoses.
- Reduced setup times
- Quick and tidy storage
- Large storage capacity
- Reel-lock function
- Suitable for mobile use, or alternatively can be fixed to the floor or wall-mounted.
D1000 plus hose reel (2.5 MB)
Every blowing injection method has its own set of requirements with regard to hose lines. Also, insulation blowing machines have different airlock outlet diameters. When you use an amplifier/vacuum station, you need some short hose pieces, a y-piece and if necessary, a control cable.
For these reasons, we offer hose sets for every machine type and blowing injection method.
Brochure hoses and connectors (2.0 MB)