With the Impact excitation test bench you can check the excitation for loose-fill insulation materials. The apparatus is based on the draft international standard ISO 18393-1 and ISO / TC 163 / SC 1N 354 E. This standard specifies methods for assessing the settlement of loose-fill thermal inslation used in attic and closed cavity application by impact excitation, vibration and climatization.

X-Floc presents the Impact excitation test bench with a stable powder-coated steel-frame, on which a motor with a cam disk is assembled. A movable frame, which is led by center bearings, so that it drops free of friction from the top point to the impact bed. The cam disk lifts the movable frame by a teleskopic ram stake to the top point. Reaching the top point the movable frame drops down to the impact beds.

The drop height can be adjusted from 10 to 110 mm by changing the length of the telescopic ram stake in 6 steps at 20 mm. To automise the means, the motor (230 V / 50 Hz) is controlled by a counter. The frame can be loaded up to 60 kg. A test box can be mounted by 4 tabs on the movable frame.