X-Floc Homepage
(77)
 SUCHEN
DeutschEnglishEspañolFrancaisРусскийPolskiNederlands
 
Zellofant

Flyer / Technical Data sheet Hächselwerk M95

SHREDDER M95

Overview

With the Häckselwerk higher-density fibre materials can be loosened better and loaded in the airlock better. The active principle is based on a passageway between two chaff spindles. From it a more even material flow is obtained and with that better blow-in results. The processing of the following materials is, for instance, clearly improved:

- Highly compacted cellulose fibre (more than 160 kg/cbm)

- Wood fibre, raw cellulose fibre

- Mineral insulation wools, such as fibreglass or mineral wool 

- Hemp fibre

- Other fibres difficult to loosen.

The Häckselwerk is an auxiliary module which can be combined with the following machine types:

- Zellofant M95-230V-3,6kW
- Zellofant M95-400V-4,2kW
- Zellofant M95-400V-4,7kW

The Häckselwerk is attached between the base and top part of the machine of the Zellofant M95. The power supply is obtained from a separate 230 V~ mains supply. The machine is activated with a master-slave switch on the machine.    

Assembly

The rigging of the Häckselwerk to a machine of the type Zellofant M95 is carried out in the following way:

1. Remove the crusher arm

2. Dismantle the hopper

3. Detach the rake unit

4. Put the Häckselwerk M95 on

5. Rig the rake unit

6. Put the hopper on

7. Contect the electrical supply

 

Häckselwerk M95 in 3-D

Notice: The 3-D model of the Häckselwerk M95 is based on EDrawings2 and can only be shown with the Internet Explorer Version 5.5 or higher. In addition, the Internet Explorer plugin Edrawings is essential for doing this. Should you not have this plugin installed, your browser will request you to do it. 

Due to the large amount of data, the loading times may be long, especially when the Internet connections are slow. (DSL - about 40 seconds; ISDN - about 7 minutes.)

3-D view